User`s guide

User Guide

140

www.bull.com

Removing or Installing the Left side cover

The left side cover provides access to the disk drive bays, to the motherboard and to the

5.25 and 3.5-inch bays.

Removing the Left Side Cover

1. Make sure the power switches for the computer, video monitor and any

peripheral devices are turned OFF and unplug the power cord (see “General

Safety Information” on page 138).

2. Disconnect the monitor and peripheral devices (printers, for instance) from the

system.

3. Remove the two screws (A).

4. Push on the latch (B) with your right hand, and with your left hand, grasp the rear

cover clasp and slide the left side cover rearward (C).

Figure 44: Removing the cover

A: screws

B: latch

C: sliding the cover out of the chassis

5. Slide the cover completely out of the chassis.

TP00559