User`s guide

User Guide
127
www.bull.com
Check Consistency
1. Run the LSI Logic Software RAID Setup Utility.
2. Select Check Consistency from the Top menu.
The Logical Drives screen appears.
3. Move the cursor onto the logical drive to be checked, and press Space to select
it.
4. Once the logical drive is selected, press F10 to start the consistency check.
5. When prompted to do so, press "Yes".
The consistency check starts.
When the progress bar in the Check Consistency Progress screen reaches
100%, the consistency check is completed.
6. Press Esc to return to the Top menu and exit the LSI Logic Software RAID
Setup Utility.
Caution
■ Be sure to execute a Check Consistency after creating a
configuration.
■ Check Consistency has two modes: "check and recover"
and "check only".
Run LSI Logic Software RAID Setup Utility
Perform Check Consistency
Exit LSI Logic Software RAID Setup Utility