User`s guide

User Guide
120
www.bull.com
Operating Procedures for the Setup Utility
Creating/Adding a Configuration
1. Run the LSI Logic Software RAID Setup Utility.
Select Configure → New Configuration from the TOP menu (Management
Menu).
Select View/add Configuration to add a configuration.
Caution
■ Creating a configuration using the New Configuration menu
clears any existing configuration information. To add configu-
ration information to an existing configuration, select View/
add Configuration.
■ You cannot create a Spanning of RAID1 or set the logical
drive capacity on the Easy Configuration menu.
Use the New Configuration or View/Add Configuration
instead.
Run the LSI Logic Software RAID Setup Utility
Set new configuration information (pack/logical drive settings)
Check the logical drive settings
Initialize logical drive
Perform a Consistency Check
Exit the LSI Logic Software RAID Setup Utility