User`s guide

User Guide
107
www.bull.com
■ The hard disk drive which has been configured as an array
disk drive cannot be selected.
3. Select a RAID type in [Select RAID Type] window and press Enter.
Put a cursor to the selected item, another window opens indicating the
minimum and maximum number of disks to create an array and a message for
assigning a spare disk.
Note: To set the RAID level, see or “Creating RAID1 Array”
on page 109 and “Creating RAID0 Array” on page 107.
Caution
After creating an array, set the boot priority for the created array
according to "Boot Priority".
Creating RAID0 Array
To create a RAID0 array:
1. Select [RAID-0] on the [Select RAID Type] window.