User`s guide

User Guide

www.bull.com

Operating Procedures for the Setup Utility

Creating/Adding a Configuration

1. Run the LSI Logic Software RAID Setup Utility.

Select Configure → New Configuration from the TOP menu (Management

Menu).

+Force Online Make a disk online

+Force Offline Make a disk offline

+Drive Properties Display hard disk drive information

• Device Type

Hard disk drive type

• Capacity

Hard disk drive capacity

• Product ID

Hard disk drive model

• Revision No.

Hard disk drive revision

+Rebuild Perform rebuilding

+Check Consistency Perform logical drive redundancy check

Run the LSI Logic Software RAID Setup Utility

Set new configuration information (pack/logical drive settings)

Check the logical drive settings

Initialize logical drive

Perform a Consistency Check

Exit the LSI Logic Software RAID Setup Utility

Table 3: Tree Menu (Continued)

Menu Description