User`s guide

User Guide
78
www.bull.com
+New Configuration Set new configuration
+View/Add Configuration Additional setting / viewing configuration
+Clear Configuration Clear configuration
+Select Boot Drive Chose Bootable Logical Drive
+Initialize Initialize logical drive
+Objects Various settings
+Adapter Set disk array controller
+Sel. Adapter Clear configuration
←Rebuild Rate
30
←Chk Const Rate
30
←FGI Rate
30
←BGI Rate
30
←Disk WC
Off
←Read Ahead
On
←Bios State
Enable
←Stop on Error
No
←Fast Init
Enable
←Auto Rebuild
On
←Auto Resume
Enable
←Disk Coercion
1GB
←Factoty Default
+Logical Drive Logical drive operation
+Logical Drives Select logical drive (when multiple logical drives exist)
+Initialize Initialize logical drive
+Check Consistency Check logical drive redundancy
+View/Update Parameters Display logical drive information
• RAID
Display RAID level
• SIZE
Display logical drive capacity
• Stripe SIZE
Display stripe size
• #Stripes
Display the number of hard disk drives in logical drive
• State
Display logical drive status
• Spans
• Disk WC
Off: Write through
On: Write back
• Read Ahead
+Physical Drive Physical drive operation
+Physical Drive Selection Menu Select physical drive
+Make HotSpare Set as hot-spare disk for auto rebuilding
Table 3: Tree Menu (Continued)
Menu Description