User`s guide

User Guide
61
www.bull.com
Installing the server in the rack
1. Install the right support rail in the rack.
2. Secure the rail to the front and rear vertical mounting rails with 3 flange head
screws M5 and the washer plate.
Figure 21: Installing the right support rail
■ Position the caged nut on the inside of the front vertical mounting rail.
■ Hook the side lip of a caged nut into the square hole in the rail.
■ Push the other side lip of the caged nut into the square hole in the rail
until it is secured.
Figure 22: Inserting a caged nut