User`s guide

User Guide
57
www.bull.com
Modifying the server from tower to rack-mount type
1. Remove the front bezel.
2. Remove the four stabilizers from the bottom of the server (4 screws).
Figure 14: Removing the stabilizers
3. Mount the stud to the front face of the server.
4. Using the screws securing the dummy cover mounted on the vacant slot of
5.25-inch device, put the device cover over the dummy cover, and secure it
together with the dummy cover.
Figure 15: Mounting the dummy cover
5. According to your system configuration, secure the 3.5-inch HDD cover to the
front cover with metric screw (M4).
■ 3.5-inch fixed disk model