User`s guide

User Guide
189
www.bull.com
Console Redirection Submenu
System Information Submenu
Table 14: Console Redirection submenu
Feature Choices or
Display Only
Description Your Setting
Console redirection Disabled
Serial Port A
Serial Port B
Enables and disables the ability of the
system to redirect screen data across
serial connection.
Flow Control None
RTS/CTS
Flow control is the handshake protocol.
Setting must match the remote terminal
application.
[None] - Configure for no flow control.
[RTS/CTS] - Configure for hardware flow
control.
Baud Rate 9600
19.2K
38.4K
57.6K
115.2K
Serial port transmission speed. Setting
must match the remote terminal
application.
terminbal Type PC-ANSI
VT100
VT100+
VT-UTF8
Character formatting used for console
redirection. Setting must match the remote
terminal application.
Legacy OS
Redirection
Disabled
Enabled
This option enables legacy OS redirection
(i.e., DOS) on serial port. If it is enabled,
the associated serial port is hidden from
the legacy OS.
Table 15: System Information submenu
Feature Choices or
Display Only
Description Your Setting
Board Part Number Information only
Board Serial Number Information only
System Part Number Information only
Sytem Serial Number Information only
Chassis Part Number Information only
Chassis Serial Number Information only
BMC Firmware Revision Information only
HSC Firmware Revision Information only
SDR Revision Information only
UUID Information only