User`s guide

User Guide
180
www.bull.com
SATA Controller Configuration Submenu
Table 16: SATA Controller Configuration Submenu
Feature Choices or
Display Only
Description Your Setting
Intel Entry SAS
RAID Module
Enabled
Disabled
Enables or disables the Intel(R)
SAS Entry RAID Module.
Unavailable if the SAS Module
(AXX4SASMOD) is not present.
Configure Intel
Entry SAS RAID
Module
LSI® Integrated
RAID
Intel® ESRTII
LSI® Integrated RAID - Supports
RAID 0, RAID 1, and RAID 1e, as
well as IT (JBOD) mode; Intel®
ESRTII - Intel® Embedded
Server RAID Technology II,
which supports RAID 0, RAID 1,
RAID 10 and RAID 5 mode.
RAID 5 support requires optional
Software RAID 5 Activation Key.
Unavailable if the SAS Module
(AXX4SASMOD) is disabled or
not present.
Onboard SATA
Controller
Enabled
Disabled
When enabled, the SATA
contoller can be configured in
IDE, RAID, or AHCI Mode. RAID
and AHCI modes are mutually
exclusive.
SATA Mode ENHANCED
Compatibility
ACHCI
SW RAID
ENHANCED - Supports up to 6
SATA ports with IDE Native
Mode. Disappears when the
Onboard SATA Controller is
disabled.
COMPATIBILITY - Supports up
to 4 SATA ports [0/1/2/3] with IDE
Legacy mode and 2 SATA ports
[4/5] with IDE Native Mode.
Changing this setting requires a
reboot before you can set HDD
boot order.
AHCI - Supports all SATA ports
using the Advanced Host
Controller Interface.
SW RAID - Supports
configuration of SATA ports for
RAID via RAID configuration
software. This option is
unavailable when EFI Optimized
Boot is Enabled. SW RAID can
only be used in Legacy Boot
mode.
SATA 0 Information only.
SATA 1 Information only.
SATA 2 Information only.
SATA 3 Information only.
SATA 4 Information only.
SATA 5 Information only.