User`s guide

User Guide
161
www.bull.com
- In Express Setup, you can not specify the details of Network adapter. Specify
them from Control Panel after starting Windows.
Problems with Disk Array Configuration
Refer to the manual supplied with the RAID controller.
Collecting Event Log
This section describes on how to collect the log of various events that occurred on the
system.
Caution: If STOP error, system error, or stall occurred, follow the procedure
below after restarting the system.
1. Click [Management Tool]: [Event Viewer] from the Control Panel.
2. Select the type of the log to collect.
On [Application Log], the events related to the running application is archived.
On [Security Log], the events related to the security is archived. On [System
Log], the events occurred at the item which configures Windows system is
archived.
3. Click [Save as...] in the [Run] menu.
4. Input the file name of archived log in the [File Name] box.
5. Select the type of the log file you want to save in the [File Type] list box and
click [OK].
For more information, refer to Windows Online Help.
Collecting Configuration Information
This section describes how to collect the information on hardware configuration and
inside specification.
In order to collect information, "Diagnostic Program" is used.
Caution: If STOP error, system error, or stall occurred, follow the procedure
below after restarting the system.
1. Point to [Settings] in Start menu, and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Management Tool], and double-click [Computer Management].
The [Computer Management] dialog box appears.
3. Click [System Tool]: [System Information].
4. Click [Save as System Information File] in the [Operation] menu.
5. Enter the file name to save in the [File Name] box.
6. Click [Save].