User`s guide

User Guide
156
www.bull.com
Fail to access to the disc:
■ Is the disc properly set in the disc drive tray?
- The tray is provided with a holder to secure the disc. Make sure that the disc is
placed properly in the holder.
■ Is the disc applicable to the system?
- The disc for Macintosh is not available for use.
- For the disk which does not conform to the CD standard, the playback of such a
disk with the CD drive is not guaranteed.
Inserted the correct disc but an error message is displayed:
■ Is the data side of the disc dirty or injured?
- Take the disc out of the disc drive, check that it is not dirty or injured, reset and
click [OK].
Fail to access the hard disk
(Refer to the documentation supplied with the disk array controller.)
■ Is the hard disk applicable to the system?
- Operation of any device that we do not authorize is not guaranteed.
■ Is the hard disk properly installed?
■ Is the hard disk properly configured?
Fail to access the (internal or external) SCSI devices:
■ Is the SCSI device applicable to the system?
- Operation of any SCSI device that we do not authorize is not guaranteed.
■ Is the cable connection changed?
■ Are SCSI devices properly configured?
- When the system has external SCSI devices connected, devices settings, includ-
ing SCSI ID and terminator, are required. Refer to the manual that comes with
the SCSI device for details.
■ Is cable length exceeded?
- Refer to the manual that comes with the SCSI device for details.
■ Are the optional SCSI controllers properly configured?
The CD-ROM is not inserted or the wrong CD-ROM is inserted.
Please insert the correct CD-ROM.
OK