User`s guide

User Guide
139
www.bull.com
Updating the System
To ensure normal system operation you should update your system using the following
procedure.
Caution: You should update your system if you have:
• Changed the system configuration (when adding or removing optional
built-in devices, do not restart the system once the system configuration
has been changed, but update the system.).
• Recovered the system using a recovery process
• Restored the system using a backup tool.
Log on to the system using the administrator account or another account which is a
member of the Administrators group.
1. Insert the ExpressBuilder disc into the optical device drive, the autorun should
start automatically and display the ExpressBuilder window.
If the Autorun function is invalid in your system, run
\ar_menu\autorun_menu.exe directly on the disc.
2. In the Menu Items, click on Setup Windows, and select Update the system.
Wait until the driver installation is completed.
3. Remove the ExpressBuilder disc from the optical device drive.
4. Restart your computer.
The update is completed.
Installing Drivers or Software
Proceed as follows to install specific drivers or software.
Log on to the system using the administrator account or another account which is a
member of the Administrators group.
1. Insert the ExpressBuilder disc into the optical device drive, the autorun should
start automatically and display the ExpressBuilder window.
If the Autorun function is invalid in your system, run
HTML\ar_menu\autorun_menu.exe directly on the disc.
2. In the Menu Items,
■ To install specific drivers: click on Setup Windows, select Driver
Directory, and browse to the directory of your choice.
■ To install software applications: click on Setup Software, and select the
application of your choice.
3. Follow the on-screen instructions
Note: Note: Prepare a blank floppy disk. You may need it when installing a
driver.