User`s guide

User Guide
136
www.bull.com
Caution:
•
The above paging file size is necessary for collecting debug information
(memory dump). If you set the default value of paging file size smaller
than the 'recommended' value, the accurate debug information (memory
dump) may not be collected.
• The maximum paging file size which can be set on one partition is
4095 MB. If the above paging file size exceeds 4095 MB, specify
4095 MB for the paging file size.
• The dump file size for a system with more than 2 GB memory installed is
'2048 MB + 12 MB'.
For example, if installed memory size is 512 MB, the minimum required partition size is:
2900 MB + (512 MB * 1.5) + (512 MB + 12 MB) = 4192 MB.
Dividing into the partition of the recommended size into multiple disks as written
below will solve problem that it cannot be reserved in one disk.
1. Set the "Size required for installation + Paging file size".
2. See Appendix F and set that debugging information (equivalent to the dump
file size) is to be written to a separate disk.
(If the disk does not have enough free space to enable the file size to be written,
then after installing the system using the "Size required for installation +
Paging file size," install an additional new disk.)
Installing Microsoft Windows Server 2003
You will need the following for Windows Server 2003 installation:
■ ExpressBuilder disc
■ Microsoft Windows Server 2003 Standard Edition (disc)
■ Windows Server 2003 OEM-DISK for ExpressBuilder
Before installing, create Windows Server 2003 OEM-DISK for ExpressBuilder.
Creating the Windows 2003 OEM-DISK from the ExpressBuilder
Note: An internet-browser with XML language support is mandatory to use
the ExpressBuilder software application.
Follow the steps below:
1. Prepare a formatted 3.5-inch floppy disk.
2. Run the operating system.
3. Insert the ExpressBuilder disc into the optical device drive, the autorun should
start automatically and display the ExpressBuilder window.
If the Autorun function is invalid in your system, run
HTML\ar_menu\autorun_menu.exe directly on the disc.