User`s guide

User Guide
104
www.bull.com
2. Remove the dummy tray.
Figure 44: Removing the dummy tray
3. Install the hard disk drive in the HDD cage.
4. Fully open the lever of the hard disk drive and insert the drive into the HDD
cage until it hits the depth of HDD cage.
5. After the hard disk drive is fully inserted into the cage, close the lever to fix the
drive. (A click occurs when it is locked.)
Figure 45: Closing the lever
Note: Make sure of the orientation of the hard disk drive tray before inserting
it into the cage according to the figure shown above. Also make sure that the
hooks of the hard disk drive are engaged with the frame of the HDD cage.
6. Close the front panel.
Removal
Caution: About data on the hard disk drive
• Be sure to take appropriate measures not to leak important data (e.g.,
customers' information or companies' management information) on the
removed hard disk drive to any third parties.