User`s guide

User Guide
85
www.bull.com
Assembly
1. Power down the server and unplug all peripheral devices and the AC power
cable.
2. Set the multi-pin adapter for the rack-type.
Figure 51: Front Multi-Pin Adapter and Bracket
(set with square pins)
The multi-pin adapters allow the slide rails to be used in racks that have square
or round mounting holes.
Note: The sliding rails are shipped with the multi-pin
adapters set for square holes. If you are equipped with an NEC
rack or another rack with square mounting holes, skip this step.
Reverse the multi-pin adapter position to match the rack mounting hole type (if
necessary) as described in the following steps: