User`s guide

User Guide
78
www.bull.com
Assembly
1. Power down the server and unplug all peripheral devices and the AC power
cable.
2. Remove the inner rail from the rail assembly.
a. Extend the inner rail until it locks (letter “A”).
b. Depress the spring safety lock to release the inner rail (letter “B”).
c. Remove the inner rail from the rail assembly (letter “C”).
Figure 40: Removing the Inner Rail from the Rail Assembly
3. Optional: fix an extension to the rear of each slide rail.
Note: Use extensions only if the rack depth is superior to
765 mm.
Attach the bracket with square holes (see letter “B”) to the rear of the outer rail
using two 10-32 x 1/2 screws.
Figure 41: Attaching the Extension to the Rail
A: Bracket with square holes
B: Bracket with round holes