User`s guide

User Guide
77
www.bull.com
Installing a Rack Mount Kit with the Basic Rails
Kit Contents
Each rack mount kit contains the following:
- Outer rail slide assembly (2) - letter “A” on the picture below.
- Inner rail slide (2) - letter “B” on the picture below.
- Rail safety stop (one each on inner slides) - letter “C” on the picture below.
- Outer slide rail screws (8 #10-32 x 1/2), inner slide rail screws (8 #6-32 x 1/4),
and rack screws (2 #10-32 x 3/4) - letter “D” on the picture below.
Figure 38: Rack Mount Kit Contents
- Rail extensions (2), to be used if the rack depth is superior to 765 mm.
Figure 39: Rails Extensions
- Washerplates (4), to be used with M5 screws (8).