User`s guide

User Guide
71
www.bull.com
3. Install the rack mounting frame (A) on the server (B) as shown in the figure
below.
Figure 32: Installing the rack mounting frame on the server
4. Slide the rack mounting frame on the server until the front of the server
protrude a little from the frame.
5. Replace the front panel.
6. Replace the right side door.
7. Align the rack mounting frame (A in the figure above) with the front panel (B).
8. Secure the frame with the grubscrews (C in the figure below, four on each side)
using the hex key (C in "Figure 26: Handles (A), screws (B) and hex key (C)").
Tighten the screws to fix the frame to the server, but do not overtighten in
order to prevent damage to the server case.
Figure 33: Securing the rack mounting frame