User`s guide

User Guide
69
www.bull.com
2. Adjust the total length to fit the distance between the front and rear vertical
rails of the rack before securing the screws.
Figure 29: Right support rail front and rear parts, fixing screws and washers
3. Assemble the left support rail the same way.
Installing the Support Rails
1. Install the right support rail (A) as shown in illustration.
2. Secure the rail to the front (B) and rear (C) vertical mounting rails with two
flange head screws (D) and the washer plate (E).
Figure 30: Installing the right support rail
3. Depending on your configuration, insert one or several caged nuts in the holes
that will allow you to secure the system on the vertical rails.
Insert the caged nuts in the front mounting rail as follows (see "Figure 31:
Inserting a caged nut"):