User`s guide

User Guide
45
www.bull.com
NovaScale T810 E1 Specific Features
Power Supply
The system contains one auto-sensing 400-watt power supply at an operating frequency
of 50/60 Hz.
The power supply is designed to comply with existing emission standards and provide
sufficient power for a fully loaded system configuration.
Peripheral Bays
The system supports a variety of standard PC AT-compatible peripheral devices. The
chassis includes these peripheral bays:
■ One 3.5-inch file bay to install a 3.5-inch floppy disk drive (supports 1.44MB
floppy disk media) or an optional file device.
■ Four 5.25-inch file bays to install half-height 5.25-inch peripheral devices such as
optional tape drives (An optical drive is factory-installed).
■ The hard disk drive bays to install up to four SATA2 or SAS hard disk drives.
Expansion Slots
■ Two 32-bit/33MHz, 3V PCI connectors.
■ One x8 PCI Express connector (x4 lane).
■ One physical x8 PCI Express connector (x8 lane).
■ One physical x16 PCI Express connector (x8 lane).