User`s guide

User Guide
252
www.bull.com
1. Insert the ExpressBuilder disc into the optical disc drive.
2. Click Start menu, point to [Programs], [Accessories] and click [Windows
Explorer]
3. Run "SETUP.EXE" in the following directory.
<Optical disc drive Letter>:\WINNT\VIDEO\RADEON7000\W2K3\SETUP.EXE
*Install the graphics accelerator driver in the following directory if you communicate
your server with the remote KVM console. (Optional advanced remote management
card must be installed in your server to use the remote KVM console.)
<Optical disc Drive Letter>:\N8115-02\VIDEO\RADEON7000\SETUP.EXE
4. Follow the message to continue the installation.
5. Remove the ExpressBuilder disc from the optical disc drive, follow the
direction on the screen and restart the system.
Installing SCSI Controller Driver
If you use SCSI controller driver, install it according to the following procedure:
1. Start [Device Manager] from [Start] menu → [Control Panel] →
[Administrative Tools] → [Computer Management].
2. Double-click the SCSI Controller driver which Device Manager lists as
unknown device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or
specific location [Advanced]" and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows Server 2003 OEM-DISK for ExpressBuilder" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8. Specify the relevant driver and click [Next].
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing RAID Controller Driver
To additionally install a RAID controller in a system containing Windows 2003,
connect the controller and take the following steps to install the driver:
1. When the [Found New Hardware Wizard] dialog box appears, click [Next].