User`s guide

User Guide
247
www.bull.com
The following message is displayed.
8. Insert the Windows Server 2003 OEM-DISK for ExpressBuilder in the floppy
disk drive, and press Enter.
A list of mass storage devices is displayed.
SCSI Model: Select the [Adaptec Ultra320 SCSI Cards (WinXP/Server 2003
IA-32)] and press Enter.
9. If the optional board is installed, select the proper SCSI Adapter and press
Enter.
10. Follow the on-screen instructions.
11. Update the system.
12. Install the driver and make detailed settings.
■ SCSI controller
The following message may appear on the display during the upgrade
installation to Windows Server 2003. Inthis case;
Please type D:/i386 and click OK. (D: CD-Drive)
Insert disk
The file 'adpu160m.sys' on Adaptec Windows 2000 Family Manager set
V1.12 S2 is needed.
■ Type the path where the file is located, and then click OK.
■ If PROSET II is already installed, uninstall the PROSET II before
upgrading.
If the teaming function is enabled, disable the function before
uninstalling PROSET II.
■ During upgrade installation, [Disk Insert] dialog box may be displayed.
If it is displayed, click Cancel.
■ When the upgrade installation is completed, [Device Driver Wizard]
dialog box may be displayed.
If it is displayed, click Cancel, then update the system.
Please insert the disk labeled
manufacturer-supplied hardware support disk
into Drive A:
*Press ENTER when ready.