User`s guide

User Guide
246
www.bull.com
SCSI Model: Select the [Adaptec Ultra320 SCSI Cards (WinXP/Server 2003
IA-32)] and press Enter.
7. Select the proper SCSI Adapter and press Enter.
8. Follow the on-screen instructions to complete the installation.
9. After installation is completed, be sure to follow the procedures described in
"Driver Installation and Advanced Settings" and "Updating the System" later
in this guide.
Upgrade installation
Procedures below upgrade the installed Windows 2000 to Windows Server 2003.
1. Power on the system and start Windows 2000.
2. Log on as an administrator.
3. Insert the Windows Server 2003 disc into the optical device drive.
[Select an operation] dialog box is displayed.
Note: If the [Select an operation] dialog box does not
appear, start \SETUP.EXE from optical device drive.
4. Select [Install Windows Server 2003].
A dialog box asks to select the upgrade or clear installation.
5. Select "Upgrade (recommended)" and click Next.
Follow the messages and continue.
The system will restart after copying the files.
Note: You can leave the Windows Server 2003 disc in the
optical device drive.
6. If the RAID controller (including embedded HostRAID feature) is installed,
press F6 while the message "Setup is inspecting your computer's hardware
configuration..." is displayed.
Note: There is no visible indication on screen when F6 has
been pressed.
7. When the following message is displayed, press S.
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.