User`s guide

User Guide
243
www.bull.com
Installing
Microsoft Windows Server 2003
You will need the following for Windows Server 2003 installation:
■ ExpressBuilder disc
■ Microsoft Windows Server 2003 Standard Edition (disc)
■ User's Guide
■ Getting Started
■ Windows Server 2003 OEM-DISK for ExpressBuilder
Before installing, create Windows Server 2003 OEM-DISK for ExpressBuilder.
Creating "Windows 2003 OEM-DISK for ExpressBuilder"
You can create Windows 2003 OEM-DISK for ExpressBuilder with the following two
procedures:
Creating from the menu which appears when running this Server with
ExpressBuilder
Use this procedure if you have only this Server to create Windows 2003 OEM-DISK
for ExpressBuilder.
■ If you have only this Server to create Windows Server 2003 OEM-DISK for
ExpressBuilder, use this procedure.
1. Prepare a 3.5-inch floppy disk.
2. Turn on your Server.
3. Insert the ExpressBuilder disc in the optical device drive.
4. Press the RESET switch or press Ctrl + Alt + Delete to reboot the server.(You
may also turn off and then on again to reboot the server.)
The system will boot from the disc and ExpressBuilder starts.
5. Select [Create Support Disk] from [Tools].
6. Select [Windows Server 2003 OEM-DISK for ExpressBuilder] from [Create
Support Disk] menu.
7. Insert a diskette in the floppy disk drive according to the on-screen instruction.
Windows Server 2003 OEM-DISK for ExpressBuilderwill be created.
8. Write-protect and label the diskette, then keep it in a safe place.