User`s guide

User Guide

228

www.bull.com

4. Remove the PCI slot shield, if it has not already been removed, by pushing the

shield out from the inside of the chassis.

Figure 174: Removing the PCI Slot Shield

5. Remove a PCI add-in board from its protective wrapper.

Caution

Be careful not to touch the components or gold-edge connec-

tors. Place the board on an anti-static surface.

6. Record the type and serial number of the add-in board in your equipment log

7. Set jumpers or switches on the board according to the manufacturer’s

instructions.

8. Hold the PCI add-in board by its top edge or upper corners. Firmly press the

add-in board into an expansion slot on the server board (A).

9. Close the back panel PCI Add-in Card Retention Device (B).

Figure 175: Installing the PCI Add-in Board

TP01745