User`s guide

User Guide
213
www.bull.com
Removing a 5.25-inch Drive
1. Remove the left side cover. See “Removing the Left Side Cover” on page 207.
2. Remove the front panel. See “Removing the Front Panel” on page 209.
3. Disconnect the cable(s) from the rear of the optical disc drive.
4. Move the latch to the “unlock” position (A).
5. Slide the optical disc drive out of the device drive bay (B).
Figure 156: Removing an Optical Disc Drive
6. When reinstalling a new optical disc drive, see “Adding a 5.25-inch Device”
on page 211 for instructions.
If you are not replacing the drive, reinstall the EMI shield and front panel filler
plate, if available.
Figure 157: Installing 5.25-in Drive EMI Shield
7. Replace the front panel. See “Replacing the Front Panel” on page 210.
8. Replace the left side cover. See “Replacing the Left Side Cover” on page 208.
TP02048