User`s guide

User Guide
211
www.bull.com
Installing or Removing a 5.25-inch Device
This section of the chapter describes how to add and remove 5.25-inch devices. You
can install an optical disc drive, tape backup unit, or other 5.25-inch devices in the
additional 5.25-inch bay.
Note: Additional power and/or data cables may be included
with your system. In this case, store them in a safe place, you
will need them if you decide to add additional drives.
Adding a 5.25-inch Device
1. Remove the left side cover. See “Removing the Left Side Cover” on page 207.
2. Remove the front panel. See “Removing the Front Panel” on page 209.
3. Remove the EMI shield from the 5.25-inch device drive bay (A).
4. Move the latch to the “unlock” position (B).
Figure 154: Removing 5.25-inch Drive EMI Shield
TP00651
A
B