User`s guide

User Guide
210
www.bull.com
Replacing the Front Panel
1. Line up the three clips on the right-side of the front bezel assembly with the
corresponding slots on the right-side of the chassis (A). Engage the clips with
the slots (B).
2. Rotate the left side of the the front bezel assembly towards the chassis (C).
3. Snap the two bezel tabs into the corresponding recesses at the left edge of the
chassis front panel (D).
Figure 153: Replacing the Front Panel
A: front panel clips
B: engaging the clips in the slots
C: rotating the front bezel assembly
D: bezel tabs
4. Replace the left side cover. See “Replacing the Left Side Cover” on page 208.
TP02035
D
D
A
A
A
C
A
B