User`s guide

User Guide
200
www.bull.com
Installing and Removing the PCI Riser Assembly
Caution
The PCI riser assembly is NOT hot swappable.
Removing the PCI Riser Assembly
To remove the PCI riser assembly, use the following instructions.
1. Make sure the power switches for the computer, video monitor and any
peripheral devices are turned OFF and unplug the power cord (see “
General
Safety Information” on page 132).
2. Disconnect the monitor and peripheral devices (printers, for instance) from the
system.
3. Remove the server cover. Refer to “Removing the Server Cover” on page 160.
4. Disconnect any cables attached to any add-in cards.
5. Lift riser assembly up to remove it. Use caution to gently easy the riser card
from the add-in card slot so you do not damage the slot or the riser card.
Figure 144: Removing the PCI Riser Assembly