User`s guide

User Guide
170
www.bull.com
Installing or Removing Hard Disk Drives
Caution
The hard drives are NOT hot swappable. Before removing or
replacing a hard drive, you must first take the server out of ser-
vice, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug
the AC power cord from the system or wall outlet.
Up to two SATA drives can be installed. The drives do not need to be installed in order;
HDD1 can be installed before HDD0.
- The HDD0 drive bay is at the left side of the chassis, underneath the optional
optical disc drive.
- The HDD1 drive bay is at the right side of the chassis.