User`s guide

User Guide
166
www.bull.com
8. Slide the optical drive assembly in through the front of the chassis.
9. Reinstall the screw that you removed in step 6.
10. Connect the power and data cables on the optical drive.
11. Insert the PCI cooling fan onto the mounting pegs that are located behind the
optical drive bay. The fan label should face the rear of the system. See letter
“A”.
Figure 111: Installing the PCI Cooling Fan
12. Optional: replace the front bezel. Refer to Installing the Front Bezel” on
page 159.
13. Replace the server cover. Refer to Installing the Server Cover” on page 161.
14. Plug all peripheral devices and the AC power cable into the server.
Note: If necessary, modify the BIOS Setup program to
recognise the additional device. For additional information, refer
to BIOS Setup Utility” on page 288.