User`s guide

User Guide
154
www.bull.com
Caution
Do not tilt the processor or shift it into place, doing so may dam-
age the sensitive contacts.
5. Check that the orientation notches and the connection 1 indicator are properly
fitted to the socket body.
6. Close the soket:
- Close the load plate.
- Press gently on the load plate and engage the load lever.
- Secure the load lever under its retention tab.
7. Remove the heatsink from its packaging materials.
8. Place the heatsink on the processor socket.
- Ensure that the fan cable(s) are on the closest side to the fan(s) header(s)
on the motherboard.
- Align the screws with the screwholes on the motherboard.
- Make sure that the heatsink is completely level with the motherboard.
Caution
Check the following:
■ No cables are trapped or interfere with the screws.
■ The screws are perpendicular to the heatsink.
9. Secure the heatsink:
- Hold the heatsink to prevent it from tilting, and tighten the screws.
10. Connect the fan cable(s) to the header(s) on the motherboard.
11. Secure the excess cable with a tie-wrap to ensure that the cable does not
interfere with fan operation or make contact with other components.
12. Close the server chassis.