User`s guide

User Guide
151
www.bull.com
Removing an Expansion Card from Your System
1. Remove the computer right side door. See “Removing the Right Side Door” on
page 139.
2. Locate the add-on card holder near the slot from which you mean to remove an
expansion card.
Figure 96: Add-on Card Holders
3. Pull up the relevant latch and slide it out.
4. Do not touch any components on the card - handle it only by its edges, to avoid
risk of damage from electrostatic discharge. Without flexing the motherboard,
carefully unplug the card from its connector on the motherboard, and remove it
from the expansion slot on the chassis' rear panel.
5. Store the expansion card in an anti-static bag (available from electronic supply
stores) or a cardboard box.
6. Place an expansion slot cover in the space left by the expansion card you
removed.
For more details on the location and availability of the expansion card slots on your
system's motherboard, see “Motherboard” on page 34.