User`s guide

User Guide
140
www.bull.com
Replacing the Right Side Door
Avoid damaging your system - before replacing the right side door, make sure no
cables or other devices protrude from the chassis.
Note: If you have previously removed the front panel, be
sure to fasten it securely to the chassis before restoring the
cover. The front panel must be securely connected to the
chassis before you replace the cover.
1. Take a few moments to examine the interior side of the cover, and notice the 2
rails on two separate edges and the 3 slots located on a third edge.
2. Leaving about 1 centimetre to slide the cover forward, lay the cover on the
chassis, and check that the rail is ready to slide on its corresponding edge and
that the slots are ready to fit with their corresponding metal hooks. You may
find this procedure easier to follow if you lay the unit on the left side.
3. Slide the cover forward as far as it will go, and make sure the cover is properly
inserted; the cover, the chassis and the front panel should fit squarely together.
4. Push the release latch down.
5. Lock the key.