User`s guide

User Guide
139
www.bull.com
NovaScale T810 E1 Upgrade
Removing or Installing the Right Side Door
The right side door provides access to the disk drive bays, to the motherboard and to
the 5.25 and 3.5-inch bays.
Removing the Right Side Door
1. Make sure the power switches for the computer, video monitor and any
peripheral devices are turned OFF and unplug the power cord (see “General
Safety Information” on page 132).
2. Disconnect the monitor and peripheral devices (printers, for instance) from the
system.
3. Unlock the key lock.
Figure 86: Key lock
4. Lift the release latch on the back of your system as shown in the picture below.
Figure 87: Right Side Door Release Latch
5. Carefully slide the right side door about two centimetres towards the back of
the unit. Please note that you may find this procedure easier to follow if you
lay the unit on the left side.
6. Lift the right side door away from the computer