User`s guide

User Guide
102
www.bull.com
Installing the Server in the Rack Cabinet
Warning
The system can weigh up to 23.5 kg. If it contains numerous
optional boards and peripheral devices, it will weigh more. To
avoid personal injury, make sure you have at least one person
help you lift or move the system.
1. Lift the server onto the support rails and slide it toward the rear of the cabinet.
2. Assemble the M5x16 screws ( "Figure 67: M5x16 screws" ) and their assorted
washers (
"Figure 68: Washers" ) as shown in the figure below.
3. Secure the server to the vertical mounting rails by inserting the screws prepared in
step 2 in the caged nuts located in the middle of the sixth U (A).
Figure 76: Securing the server to the rack cabinet
A
A