Installation guide

User Guide
42
www.bull.com
12. Select the disk where the installation partition will be created, and click Drive
options (advanced).
Note: If the partition has already been created, go to step
15.
13. Click New, enter a partition size, and click Apply.
14. Select the partition created in step 13, and click Format.
15. Select the partition created, and click Next.
The installation starts automatically.
Note: Please wait until the installation is complete, do not
shutdown or press any key on your system. The system may
automatically reboot several times during the process.
16. When prompted to do so, log on to the system. The steps vary depending on the
edition you selected in step 6.
If you have selected a full installation
a. You will be prompted to set or change the password before you log on.
Click OK.
b. Change the password, and click .
Note: your password must be composed of 10 characters,
containing lower cases, upper cases and one complex
character.