Installation guide

User Guide
39
www.bull.com
Installing Drivers after the Upgrade
This section provides the procedures for installing the driver(s) for optional
controller(s) after the upgrade.
Caution
You may need to install multiple drivers, depending on your
environment.
Installing a driver for the RAID Controller
LSI Logic MegaRAID SAS 8708EM2 RAID Controller
To install a driver for this controller, see “Updating the System” on page 21.
Installing a driver for the SCSI controller
Adaptec SCSI card 29320LPE / 29320ALP
To install a driver for this controller, see “Updating the System” on page 21.
Installing a SCSI Controller*
Adaptec SCSI Card 29160LP
You do not need to install the driver manually, it is automatically installed by Windows
Plud-and-Play.