Installation guide

User Guide
26
www.bull.com
Fault Recovery Settings
This chapter provides the procedures for configuring fault recovery settings.
Network Monitor Setup
Microsoft Network Monitor allows you to examine and troubleshoot network failures.
Note: Microsoft
®
Windows Server
®
2008 does not provide
Network Monitor. To use Network Monitor on Microsoft
®
Windows Server
®
2008, install Network Monitor by following the
steps below.
1. Download Microsoft Network Monitor at:
http://support.microsoft.com/kb/933741/en-us
2. Run the downloaded file to start the installer.
Follow the on-screen instructions to install Network Monitor.
Note: If a Security Alert appears, click Run. Select
Complete as a setup format.
Network Monitor has been installed.
Note: To remove Network Monitor, go to Programs and
Features.
Network Trace Capture
1. In the Start menu, start Microsoft Network Monitor.
2. In Start Page, select Create a new capture tab... or select New in the File menu,
and click Capture....
A new tab for capturing a network trace is created.
3. In the Select Networks window, select a network whose trace is captured.
4. In the
Capture menu, click Start to start capturing a network trace.
5. In the
Capture menu, click Stop to stop capturing a network trace.
6. In the File menu, select Save As....
The Save As window appears. Select All captured frames from Frame selection,
and enter the names of a folder and a file.