Installation guide

User Guide
23
www.bull.com
6. When InstallShield Wizard complete appears. Click Finish.
Restart the system.
For a server running a Server Core installation
1. Note down the current settings (e.g. IP addresses) of the standard and optional
adapters teamed for network redundancy before uninstalling LAN driver.
Configure the settings after reinstalling the LAN driver.
2. At a command prompt, run DxSetup.EXE available on the ExpressBuilder:
■ Microsoft
®
Windows Server
®
2008 64-bit (x64) Editions:
\DRIVERS\LAN\APPS\PROSETDX\VISTA32\DxSetup.exe
■ Microsoft
®
Windows Server
®
2008 32-bit (x86) Editions:
\DRIVERS\LAN\APPS\PROSETDX\VISTAX64\DxSetup.exe
3. In Intel(R) Network Connections - InstallShield Wizard, click Next.
4. Select Remove, and click Next.
5. Click Remove.
Removal starts automatically.
6. When InstallShield Wizard Completed appears, click Finish.
Restart the system.
Adapter Fault Tolerance (AFT)/ Adaptive Load
Balancing (ALB)
Adapter Fault Tolerance (AFT) provides network adapter redundancy by creating a
team of adapters. If any adapter fails, another in the team automatically takes over.
Adaptive Load Balancing (ALB) improves the overall network throughput by equally
balancing data traffic among a team of adapters.
You can configure AFT and ALB using the standard and optional network adapters.
Caution
■ Adapter Fault Tolerance (AFT) and Adaptive Load Balancing
(ALB) are not available when Server Core is in use.
■ Be sure to configure AFT and ALB after you boot the system
following the driver installation.
Creating a Team
1. Open Control Panel. Under System and Maintenance, click Open Device
Manager
to start Device Manager.