Installation guide

User Guide
21
www.bull.com
Updating the System
To ensure normal system operation you should update your system using the following
procedures.
Caution
You should update your system if you have:
■ Changed the system configuration (Added or removed
optional built-in devices: If you are prompted to restart the
system after the system configuration has been changed,
click No, and update the system.)
■ Recovered the system by using a recovery process
■ Restored the system by using a backup tool
Log on to the system using the administrator account or other account which is a
member of the Administrators group.
1. Insert the ExpressBuilder disc into the optical device drive.
2. When the AutoPlay box appears, click Run autorun_menu.exe.
3. In the Menu Items box, select Setup Windows, and click Update the system.
Note: added or removed devices, listed in “Supported
Optional Boards” on page 11, are automatically detected and
installed.
The driver installation starts.
4. Remove the ExpressBuilder disc from the optical device drive.
5. Restart your computer.
The update is complete.