Installation guide

User Guide
17
www.bull.com
Installing Microsoft
®
Windows Server
®
2008
This chapter provides the steps to install Microsoft
®
Windows Server
®
2008.
1. Turn on your system.
Caution
To install Microsoft
®
Windows Server
®
2008, you may need to
update BIOS. To check if your system needs a BIOS update, go
to: http://support.bull.com
2. Insert the ExpressBuilder DVD in your DVD-Rom drive.
3. Restart the system.
To restart the system, press Ctrl + Alt + Del or turn off the system once, and
turn it on again.
Caution
When prompted to press any key to boot from CD or DVD, click
Enter while the message is displayed. If the Windows installa-
tion screen (shown in step 4) does not appear, turn off the sys-
tem, and turn it on again.
The DVD-ROM starts.
4. When prompted, check the language of your choice, and click OK.
Note : At this step, the choosen language is set up for
installation menus only. The language of Microsoft
®
Windows Server
®
2008 is linked to the version you are going to
install on your computer.
5. Select Setup Windows, and click Express Setup for Windows.
6. In the ExpressSetup assistant window, select the following options:
■ Operating system to install
■ System partition to create, if you need to create one