User`s guide

Setting Up Your Server 3-21
To connect the power cord from the server to an uninterruptive power supply (UPS), use service outlets on the rear of the UPS.
Refer to the manual that comes with the UPS.
When the power cord from the server is connected to a UPS, change the BIOS setup of the server to link with power supply
from the UPS.
To power on the server from the UPS (Uninterruptible Power Supply), select [Server] - [AC-LINK] - [Power On].
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See Chapter 4 for details.