User`s guide

3-12 Setting Up Your Server
IMPORTANT:
 Be very careful not to get your finger caught in the levers or rails.
 Insert both sides of inner rails straight into the rack.
 Hold the thumbscrews on both sides of the server, and install the server carefully while making
sure the installation position.
NOTES:
 At the first installation, you may feel strong friction in pushing because the mechanical
components cannot be completely engaged with each other. Push the server intensely.
 If the installation is incomplete, either of rails may not go further on its way. In such a case,
pull out the server completely until it is locked. Then, push the server in while unlocking the
right and left sides of it.
4. Make sure that the sliding rails move smoothly by pulling the server out of the rack and pushing it in several times.
NOTES:
 When installing the server in the location adjacent to other devices, pay attention to
interference. If the server disturbs the devices already installed, adjust the position, and install
the rail assembly again.
 Make sure that the sliding rails move smoothly. If the sliding rails are stuck to the rack frame
and do not come out, reinstall them.