User`s guide
Setting Up Your Server 3-7
2. While pushing the unlock button on the front of the server, hold the rails and slowly move them toward the rear of
the server.
Press this button to
unlock the server.
3. When you hear a click, the rails are locked. Pull the release levers on the left and right sides of the server toward
direction indicated by an arrow (white) in the figure, and remove them from the server while unlocking it.
Pull the release lever toward the
direction shown by the arrow
(white) to remove the rail.
4. Only the inner rails remain screwed to the server when the rail assemblies have been removed.
Inner rail
Lever