User`s guide

2-32 General Description
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen. See Chapter 8 for POST error codes.
IMPORTANT: Take a note on the messages displayed before consulting with your service
representative. Alarm messages are useful information for maintenance.
Power Off
Follow the procedure below to power off the server. If the power cord of the server is connected to a UPS, refer to the manual
that comes with the UPS or the manual for the application that controls the UPS.
IMPORTANT: Always allow POST to complete before turning off the server.
1. Shutdown the OS.
2. Press the POWER switch on the front of the server.
The POWER LED goes off.
3. Power off peripheral devices.
NOTE: The standby feature of Windows Server is not available. Do not select "Standby" in
Windows shutdown menu.