User`s guide

2-26 General Description
USING YOUR SERVER
This section describes basic operations of the server including how to use devices such as the optical disk drive.
Front Bezel
Remove the front bezel to power on/off the server, to access the optical disk drive and to install/remove hard disk drives to the
3.5-inch disk bays.
IMPORTANT:
 To open the front door, you must unlock the door with the provided security key.
 Pay attention not to press the POWER switch when you install or remove the front bezel.
Installing or Removing the Front Bezel
When turning the power of the server on/off, accessing to the optical disk drive, or installing or removing a hard disk drive on
or from the 3.5-inch disk bay, first remove the front bezel.
IMPORTANT: The front bezel can be opened only when you unlock it by using the attached
security key.
1. Insert the attached security key into the key slot and turn the key to the front bezel side with it pressed lightly to
release the lock.
Lock
Unlock
2. Hold the right end of the front bezel lightly to pull it toward you.