User`s guide

Installing Windows Server 2003 X64 Editions E-21
Graphics Accelerator Driver
If you utilize standard graphics accelerator drivers, update your system with ExpressBuilder DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Please follow the following procedure when you want to reinstall the driver individually.
1. Insert the ExpressBuilder DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "Install.bat" in the following directory.
\009\win\winnt\w2k3amd\video\install.bat
4. Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5. Remove the ExpressBuilder DVD from the optical disk drive, restart the system.
Installing SCSI Controller Driver
If you use the SCSI Controller ADAPTEC 29320ALP or Adaptec ASC-29320LPE , update your system with ExpressBuilder
DVD attached to your system.
The SCSI Controller driver will be installed automatically.
Installing SCSI Controller Driver
If you use the SCSI Controller ADAPTEC 29160LP, you do not need to install the driver manually. It is automatically installed
by Windows Plug-and-Play.
Installing SAS Controller Driver
If you use the SAS Controller SAS CTRL 3442E-R, update your system with ExpressBuilder DVD attached to your system.
The SAS Controller driver will be installed automatically.