User`s guide

Installing Windows Server 2003 X64 Editions E-19
Setting WOL
Refer to the following procedure to enable WOL.
When PROSet is not installed
1. Start Device Manager.
2. Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server Network
Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2] to open the adapter [Properties].
3. Click [Power Management] tab and change setting in [Wake On LAN] according to the following list.
Setting item
Default
setting
Change
setting
"Allow the computer to turn off this device to save power" ON ON
"Allow this device to bring the computer out of standby" OFF ON
4. Click [Advanced] tab and point to [Enable PME].
5. Set the "Enable" in [Value].
6. Click [OK].
7. Reboot the system.